304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

5+ Tips How to Remove Epoxy from Concrete Effectively

Hey there! So, you’ve got some old epoxy stuck on your concrete and you want to get rid of it. Well, you’ve come to the right place! In this guide, I’m going to show you exactly how to remove epoxy from concrete, step by step.

Don’t worry if you’ve never done it before – I’ll explain everything in a way that’s easy to understand. By the end of this article, you’ll have all the knowledge and confidence you need to tackle this project and get your concrete looking as good as new. So, let’s dive in and get started, shall we?

Quick Tips

Tip 1: Use heat to soften the epoxy. Heat the epoxy using a heat gun or blow dryer for a few minutes until it becomes soft and pliable.

Tip 2: Scrape off the softened epoxy. Take a putty knife or a scraper and gently scrape off the softened epoxy from the concrete surface. Be careful not to damage the concrete while doing this.

Tip 3: Apply a solvent to dissolve the epoxy. Use a solvent specifically made for removing epoxy, such as acetone or paint stripper. Apply the solvent to the epoxy and let it sit for a few minutes. Then, scrub the area with a stiff brush to help dissolve the epoxy.

Tip 4: Rinse and repeat if necessary. After removing the majority of the epoxy, rinse the area with clean water. If there are any remaining traces of epoxy, repeat the process of heating, scraping, and applying solvent until the concrete is completely free from epoxy.

Scrape off the softened epoxy with a putty knife

To scrape off softened epoxy with a putty knife, make sure you have all the necessary tools at hand. You will need a putty knife with a sharp edge, a solvent such as acetone or rubbing alcohol, and a clean rag or paper towel. Once you have everything ready, start by applying the solvent to the epoxy. This will help soften it, making it easier to remove.

Next, take your putty knife and hold it at a slight angle against the epoxy. Apply gentle pressure and begin to scrape off the softened epoxy. Be careful not to use too much force, as this can damage the surface underneath. If the epoxy starts to harden again or becomes difficult to remove, you can reapply the solvent and let it sit for a few minutes before continuing with the scraping process.

As you scrape off the epoxy, periodically wipe the putty knife clean with a rag or paper towel. This will prevent any residue from building up and affecting your progress. Additionally, it’s important to work in small sections, focusing on one area at a time.

This will make the process more manageable and ensure that you remove all the softened epoxy. Once you have finished scraping off the epoxy, clean the surface with warm soapy water to remove any remaining residue.

How to Remove Hardened Epoxy From Cement / Concrete

Apply a commercial epoxy remover and let it sit for several minutes

You’re probably tired of staring at that old, stubborn epoxy coating on your floor. Luckily, I’ve got a solution for you. To remove that pesky epoxy, you’ll need to apply a commercial epoxy remover. Start by pouring the remover onto the epoxy-covered surface, making sure to cover every inch. Then, step back and let it sit for several minutes. This will give the remover enough time to break down the epoxy and make it easier to remove.

As you wait for the epoxy remover to work its magic, you can use this time to gather the necessary tools for the next step. You’ll need a scraper or a putty knife to effectively remove the epoxy. Once the remover has been sitting for a few minutes, grab your scraper and start at one edge of the epoxy patch. Apply some pressure and begin scraping away the softened epoxy. Don’t worry if it doesn’t come off in one go; you may need to repeat this process a few times to fully remove the epoxy.

Remember to be patient and take breaks when needed. Removing epoxy can be a time-consuming task, but the end result will be worth it. After you’ve scraped off all the epoxy, you can clean the surface with a damp cloth to remove any residue. Your floor will now be free from that unsightly epoxy, and you can enjoy a fresh, clean surface once again.

Use a wire brush or abrasive pad to scrub off the loosened epoxy

After you have successfully loosened the epoxy using the heat method, it’s time to remove the residue from the surface. To do this, grab a wire brush or an abrasive pad. These tools are perfect for scrubbing off the loosened epoxy as they provide enough friction to remove any remnants.

Start by holding the wire brush or abrasive pad firmly in your hand. With a back-and-forth motion, begin to scrub the surface where the epoxy was loosened. Apply moderate pressure as you scrub to effectively remove the residue.

Continue scrubbing until all the epoxy has been removed. You may need to make a few passes over the area to ensure a thorough clean. Once you’re satisfied with the outcome, wipe the surface with a clean cloth to remove any leftover debris. Your surface will now be free of epoxy and ready for its next use.

Rinse the concrete surface thoroughly with water to remove any residue

To begin the process of rinsing the concrete surface, gather a hose and nozzle that can create a strong stream of water. It’s important to remove any residue that may be left behind after cleaning. Start by spraying the entire surface evenly with water. Make sure to cover all areas, including corners and edges, to ensure a thorough rinse.

As you go along, keep an eye out for any remaining dirt or debris that may need extra attention. Adjust the nozzle to a more concentrated setting and focus the stream on those stubborn spots until they’re completely clean.

Once you have rinsed the concrete surface with water, take a moment to inspect it. Look for any remaining residue, stains, or discoloration that might need further treatment. If you spot any stubborn marks, try scrubbing them gently with a stiff brush or a broom. Apply a little bit of pressure to effectively scrub away any dirt or oil stains. Remember to always move the brush in a back-and-forth motion to avoid wearing down the concrete surface unevenly.

After you’ve completed the rinsing process, it’s important to allow the concrete surface to dry completely. This is crucial before applying any sealers, paints, or other products. Depending on the weather conditions, it may take a few hours or even a full day for the concrete to dry fully.

Ensure that you choose a time when the weather is dry and sunny, as this will speed up the drying process. Patience is key during this step to achieve the best results for your concrete surface.


As a result, being able to remove epoxy from concrete can greatly improve your quality of life. You will save time, money, and effort as well as greatly reduce your work load. By following the outlined steps, which include using a heat gun or propane torch to soften the epoxy, scraping off the softened epoxy with a putty knife, and applying a commercial epoxy remover, you can effectively remove unwanted epoxy from your concrete surfaces.

This knowledge empowers you to tackle any epoxy-related issues, such as removing spills or fixing mistakes, without having to call in professionals or replace the entire concrete. By taking matters into your own hands, you can maintain the appearance and functionality of your concrete surfaces, ultimately enhancing your living environment.

FAQ How to Remove Epoxy from Concrete

Q1: What is epoxy and why is it often used on concrete surfaces?
A1: Epoxy is a type of adhesive and coating material that is commonly used on concrete surfaces due to its durability, resistance to chemicals, and ability to create a smooth, glossy finish. It is often used in industrial, commercial, and residential applications to enhance the appearance and protect concrete floors, countertops, and other surfaces.

Q2: Why would someone need to remove epoxy from concrete?
A2: There are various reasons why someone might need to remove epoxy from concrete. It could be due to the desire to change the appearance of the surface, repair damage, or remove old, worn-out epoxy coatings that are no longer effective. Sometimes, epoxy may need to be removed to allow for proper adhesion of a new layer or a different type of coating on the concrete.

Q3: What are the different methods available to remove epoxy from concrete surfaces?
A3: There are several methods to remove epoxy from concrete, including:

1. Grinding: Using a concrete grinder with abrasive pads or discs to mechanically grind off the epoxy layer.
2. Chemical Stripping: Applying epoxy paint strippers or commercial paint removers specifically designed for removing epoxy from concrete and following the instructions on the product.
3. Heat Application: Using a heat gun or propane torch to warm the epoxy, making it soft and easier to scrape off.
4. Abrasive Blasting: Utilizing sandblasting or shot blasting to remove the epoxy coating by propelling abrasive materials using compressed air.

Q4: What tools and materials will be required for epoxy removal?
A4: The tools and materials required to remove epoxy from concrete include:

1. Concrete grinder with appropriate abrasive pads or discs
2. Chemical epoxy paint stripper or commercial paint remover
3. Heat gun or propane torch
4. Scraper or putty knife
5. Protective gear such as gloves, safety glasses, and a respirator
6. Sandblasting equipment (if abrasive blasting method is chosen)
7. Cleaning agents and water for surface preparation and cleanup

Q5: How can I choose the best epoxy removal method for my situation?
A5: The choice of epoxy removal method depends on various factors, including the thickness of the epoxy layer, the surface area to be treated, and the equipment and materials you have access to. It’s recommended to assess your specific requirements, consult with professionals if needed, and choose a method that suits your situation best.

Q6: Are epoxy removal methods safe for the concrete underneath it?
A6: When performed correctly using the appropriate tools and techniques, epoxy removal methods should not cause significant damage to the concrete surface. However, more aggressive methods like grinding and abrasive blasting may cause slight surface irregularities or require subsequent surface refinishing. It is essential to follow manufacturer instructions and take necessary precautions during the process.

Q7: How long does it typically take to remove epoxy from concrete?
A7: The time required to remove epoxy from concrete depends on several factors, such as the thickness of the epoxy, the method chosen, and the size of the area being treated. Smaller areas or thin epoxy layers may take a few hours, while larger surfaces or thick epoxy coatings may require several days of work.

Q8: Can anyone remove epoxy from concrete by themselves, or is professional assistance recommended?
A8: While epoxy removal can be done by individuals with proper tools and guidance, larger projects or more complex situations might require professional assistance. Professionals have the experience, expertise, and specialized equipment to efficiently and safely remove epoxy from concrete, ensuring optimal results.

Q9: How can I maintain the concrete surface after epoxy removal?
A9: After removing epoxy from concrete, ensure that you thoroughly clean and prepare the surface. You can consider applying a new layer of epoxy or choose an alternative coating such as concrete sealer or polyurethane to protect the concrete and enhance its appearance. Regular cleaning and maintenance, according to the specific coating used, will help to prolong the concrete’s lifespan and preserve its aesthetics.

Q10: Are there any precautions I should take while removing epoxy from concrete?
A10: Yes, safety measures are crucial during epoxy removal. It is advisable to wear protective gear such as gloves, safety glasses, and a respirator to prevent skin and eye irritation or inhalation of harmful chemicals or dust particles. Follow all manufacturer instructions when using chemical strippers or commercial paint removers and be cautious while handling heat tools or abrasive equipment to avoid injuries.

Disclaimer : The information provided in this blog post is for informational purposes only. It is advised to consult professionals or epoxy manufacturers for guidance specific to your situation before attempting to remove epoxy from concrete.

Share your love